Siemens TIA Portal V18 & WinCC Comfort (HMI&SCADA) (Basic to Advance) IIOT & Cloud Programming (5 days) PLC Programming Training Course
1) Training Course Objectives:
ASASMY offer you specialized training course which can be tailor made under customer requirement. Our qualified trainers all have practical, professional experience and know how to apply theoretical knowledge in this particular practice. Basic to Advance PLC Programming course provides a deep understanding of Siemens S7-1200 PLCs programming capabilities and IIoT programming. Control strategies and programming will be reviewed. Data Movement, Floating Point Math, Shift, Compare, Distribute, Collection, Transfer, and other instructions will be covered.
2) Training Course Content:
Day 1 Morning
LESSON 1 – Introduction and Overview
• Course Objectives.
• Course Prerequisites.
• Computer Numbering Systems.
• Course Objectives.
• Course Prerequisites.
• Computer Numbering Systems.
LESSON 2 – Number Systems
• Binary Numbers.
• Hexadecimal Numbers.
• Octal Numbers.
• Binary Coded Decimal.
• Integer (16/32 Bit).
• Decimal (16/32 Bit).
• Binary Numbers.
• Hexadecimal Numbers.
• Octal Numbers.
• Binary Coded Decimal.
• Integer (16/32 Bit).
• Decimal (16/32 Bit).
LESSON 3 – Hardware Review
• Hardware Components.
• Inputs and Addressing
• Outputs and Addressing
• Power Supplies.
• Memory Types.
• Hardware Components.
• Inputs and Addressing
• Outputs and Addressing
• Power Supplies.
• Memory Types.
Day 1 Afternoon
LESSON 4 – Programming Equipment
• Programming Siemens TIA Portal Overview
• File Format
• Hardware Connection.
• Communication (Profinet).
• Programming Siemens TIA Portal Overview
• File Format
• Hardware Connection.
• Communication (Profinet).
LESSON 5 – Basic Instructions
• Symbols
• Ladder Logic.
• STL (Statement List).
• FBD
• Symbols
• Ladder Logic.
• STL (Statement List).
• FBD
LESSON 6– Develop and Edit Programs
• Launching Simatic TIA Portal V18.
• Creating a New Project.
• Editing the Ladder.
• Exercise – Contacts and Coils. Program Transfer.
• Online Editing.
• Monitor the Program Operation.
• Forcing Bits and Changing Registers.
• Launching Simatic TIA Portal V18.
• Creating a New Project.
• Editing the Ladder.
• Exercise – Contacts and Coils. Program Transfer.
• Online Editing.
• Monitor the Program Operation.
• Forcing Bits and Changing Registers.
Day 2
LESSON 7 – Programming Functions with Projects
• Timers, Counters Math functions, MOV, other Functions.
• Program Examples and programming functions
• Best Practices in Programming (GPP)
• Indirect Addressing.
• Monitor the Program Operation. Forcing Bits and Changing Registers.
• Troubleshooting Methodology. Additional Timer Commands.
• Exercise – Timers, Counters,
• Exercise – Conveyors.
• Timers, Counters Math functions, MOV, other Functions.
• Program Examples and programming functions
• Best Practices in Programming (GPP)
• Indirect Addressing.
• Monitor the Program Operation. Forcing Bits and Changing Registers.
• Troubleshooting Methodology. Additional Timer Commands.
• Exercise – Timers, Counters,
• Exercise – Conveyors.
Day 3
LESSON 8 – Integration to HMI & SCADA
• Introduction to WinCC Comfort and Runtime.
• Various Functions display in HMI.
• Mixer Tank Project creation in PLC. Downloading to PLC and Debugging.
• Creating Screens to Control Mixer Tank and Monitor. Establishing comm To PLC and HMI.
• Debugging and Monitoring.
• Creating WinCC Comfort Runtime PC based.
• Introduction to WinCC Comfort and Runtime.
• Various Functions display in HMI.
• Mixer Tank Project creation in PLC. Downloading to PLC and Debugging.
• Creating Screens to Control Mixer Tank and Monitor. Establishing comm To PLC and HMI.
• Debugging and Monitoring.
• Creating WinCC Comfort Runtime PC based.
Day 4
LESSON 9 –Webserver with IIoT programming
• Introduction to Industry 4.0
• PLC Configuration for Webserver
• Create Siemens Webserver and integrate to with PLC
• Create User defined webpage to monitor and modify PLC variable
• Introduction to Industry 4.0
• PLC Configuration for Webserver
• Create Siemens Webserver and integrate to with PLC
• Create User defined webpage to monitor and modify PLC variable
Day 5
LESSON 10 – Cloud monitoring using IBM cloud
• Introduction cloud monitoring
• Introduction to OPC
• Create PLC cloud programming
• Configure OPC software
• Configure IBM cloud
• Integrate IBM cloud to OPC
• Integrate OPC to PLC
• Introduction cloud monitoring
• Introduction to OPC
• Create PLC cloud programming
• Configure OPC software
• Configure IBM cloud
• Integrate IBM cloud to OPC
• Integrate OPC to PLC
3) Training Course Aims:
Upon completion of this course, the students will be able to:
• Construct, test and run PLC programs using instructions.
• Utilize advanced trouble shooting tools online.
• Download, Upload, Save and copy programs.
• Formulate a control strategy for creating PLC programs.
• Fully document a PLC program.
• Use multiple PLCs in a project.
• Utilize advanced troubleshooting tools.
• Construct, test and run PLC programs using instructions.
• Utilize advanced trouble shooting tools online.
• Download, Upload, Save and copy programs.
• Formulate a control strategy for creating PLC programs.
• Fully document a PLC program.
• Use multiple PLCs in a project.
• Utilize advanced troubleshooting tools.
4) Durations: 5 days
5) Recommended Audience:
Electricians, Technicians, Engineers, Maintenance Personnel, Control Engineers, Individuals who need to be able to understand the advanced capabilities of Siemens S7-1200 PLCs.
6) Prerequisites:
• Basic computer skills are required.
• Basic Knowledge in Siemens PLC.
• Basic Electricity Knowledge.
• Basic Knowledge in Siemens PLC.
• Basic Electricity Knowledge.
7) Equipment:
• PLC S7-1200, Simatic Touch Panel
• Training Laptop with Siemens TIA Portal V18 & WinCC Comfort Installed for 2 Person Share.
• Training Laptop with Siemens TIA Portal V18 & WinCC Comfort Installed for 2 Person Share.
8) Trainer’s 1 Introduction:
With over 35 years’ experience, Mr. Sunderasen is a veteran Project Engineer trained in Electrical & Instrumentation (Australia) and PLC/Robotics (Ngee Ann Poly, Singapore). He has worked extensively across Europe & Asia, trained in Siemens, Allen-Bradley, Omron, GE, and Adept, and led major automation projects in OEM, BMS, and Pharmaceutical Plants (e.g., Schering Plough, Tuas).
He is also the designer of custom training systems for institutions like UTM, NSSDC, and ADTEC, and the primary mentor/trainer of Mr. Thivyan, passing down decades of hands-on knowledge.
He is also the designer of custom training systems for institutions like UTM, NSSDC, and ADTEC, and the primary mentor/trainer of Mr. Thivyan, passing down decades of hands-on knowledge.
Trainers 2 Introduction :-
With over 8 years’ experience, Mr. Thivyan is a Mechanical Engineer turned PLC/HMI Trainer and Project Engineer, fully trained and mentored by Mr. Sunderasen. He has delivered automation solutions for clients like MSD, Dyson, Kerry, Petronas, and Carlsberg, and trains engineers across Malaysia & Singapore in Siemens, Allen-Bradley, Omron, Mitsubishi, GE, Schneider & Keyence systems.
Siemens TIA Portal V18 (S7- 1200 / S7-1500 PLC ) & WinCC Comfort (HMI&SCADA) (Basic to Advance) IIOT & Cloud Programming (5 days)
Basic & Advance, 5 Days for Per Pax:
Min 1 Pax , Max 8 Pax (T&C Applied)
CONTACT US FOR PRICING
(HRDF Claimable).
Individual Sponsor cannot be claim under HRDCorp.
• Registration can be done by direct call through Whatsapp: +60102443914 (Yokes) and date conformation will be done through Email.
*Price may vary according to Market Condition.
Min 1 Pax , Max 8 Pax (T&C Applied)
CONTACT US FOR PRICING
(HRDF Claimable).
Individual Sponsor cannot be claim under HRDCorp.
• Registration can be done by direct call through Whatsapp: +60102443914 (Yokes) and date conformation will be done through Email.
*Price may vary according to Market Condition.