PLC Training Centre Malaysia - AS Automation Services Blog

PLC , HMI , SCADA TRAINING in Mitsubishi FX Series PLC, GX Works 2 Software + HMI + Servo Motor, 5 Days Under HRDCorp SBL-Khas from a company that specializes in the design, manufacture, and services of industrial rotating equipment, namely Mechanical Se

29/7/2022

Direct message Thivyan/Yokes for inquiry/Booking -> Please register here:- https://www.asasmy.com/registration.html . Pricing is negotiable through a phone call, we are HRDCorp Registered Training Provider, SBL-KHAS Approved Training Provider & Appreciated by University Technology Malaysia. Specialize in Industrial Automation training, services, and consultation since the year 2012.

*For the first time we have succesfully conducted training for this client where majority is women (Engineers), well, we proud of it.

The participant has learnt the following task:
Basic to Advance Level Training.
Mitsubishi GX-WORKS 2 Software .
Mitsubishi FX Series PLC Hardware.
Ladder Logic Programming.
VSFT (HMI) , TELLUS (SCADA).
Online, Downloading and Troubleshooting Procedures.
Hardware Wiring & Hands-on project.
Stepper Motor training.

#selangor #industrialautomation #mitsubishielectric #plc #gxworks2 #fxseries #vsft #plctraining #malaysia #SelfalignedBearing #hrdf #sblkhas #services #manufacturing #testing #commissioning #hardware #ModularPumpTechnology #equipmentdesign #systemintegration #rotatingequipment #MechanicalSeals #femaleengineers #rawang #CycloneSeparator #Impeller #Bearing #psmb #Pump #industry4_0

Siemens Simatic Manager V5.6 & TIA Portal V15.1, Basic to Advance ; Software: Simatic Manager V5.6, WinCC Flexible 2008TIA Portal V15.1 ; Hardware : S7300 PLC, Simatic Panel & S71200. 1 PAX, 8 Days. (Special Request)

20/7/2022

Direct message Thivyan/Yokes for inquiry/Booking -> Please register here:- https://www.asasmy.com/registration.html . Pricing is negotiable through a phone call, we are HRDCorp Registered Training Provider, SBL-KHAS Approved Training Provider & Appreciated by University Technology Malaysia. Specialize in Industrial Automation training, services, and consultation since the year 2012.

The participant has learnt the following task:
• Basic to Advance Training.
• Simatic Manager V5.6 & TIA Portal V.15.1 Software.
• Siemens S7-300 & S7-1200 PLC Hardware.
• WinCC Flexible 2008 SP5 + Runtime(HMI).
• TIA Portal WinCC Advance (HMI).
• Configuration of Hardware & HMI.
• Hardware Wiring , Hands-On Projects.
• Backup & Restore.
• Online Debugging & Troubleshooting Procedure.

#plcprogramming #automation #plc #programming #scada #industrialautomation #hmiscada #automation #electricalengineering #controlsystem #instrumentation #siemensplc #plcsiemens #hmi #plctraining #electrical #siemens #industry4_0 #tiaportal #factoryautomation #industrialcontrol #training #scadatraining #hmitraining #industrial #Engineering #smartphone #PanelBuilding #maintenance #malaysia

PLC, HMI, SCADA TRAINING in Mitsubishi FX Series PLC with GX Works 2 Software + HMI & Scada for company that manufacture CNC Machines & Provide Quality Control.

14/7/2022

Direct message Thivyan/Yokes for inquiry/Booking -> Please register here:- https://www.asasmy.com/registration.html . Pricing is negotiable through a phone call, we are HRDCorp Registered Training Provider, SBL-KHAS Approved Training Provider & Appreciated by University Technology Malaysia. Specialize in Industrial Automation training, services, and consultation since the year 2012.

The participant has learnt the following task:
Basic to Advance Level Training.
Mitsubishi GX-WORKS 2 Software .
Mitsubishi FX Series PLC Hardware.
VSFT-V5 (HMI) , TELLUS (SCADA).
Ladder Logic Programming.
Online, Downloading and Troubleshooting Procedures.
Hands-on project.
Hardware Wiring.
STEPPER MOTOR PROGRAMMING.

#cnc #plc #programmablelogiccontrollers #MITSUBISHIM50C #mitsubishielectric #mitsubishiplc #industrialautomation #automation #industrial #industrialservice #electricalengineering #gxworks2 #controlpanel #PulauPinang #industrialtrainingprovider #HARDFORD #industrialprojects #hrdf #FEELEE #malaysia #johor #BukitMertajam #plchmiscada #kemahiranplc #industry4_0 #MITSUBISHIMV40C #trainingprogram #LITZLV660 #ElectronicsMaterials #industry4point0

Mitsubishi PLC FX3G 40MR + FX2N EYR with 2 days training and machine programming / Consultation to our previous participant.

5/7/2022

Direct message Thivyan/Yokes for inquiry/Booking -> Please register here:- https://www.asasmy.com/registration.html . Pricing is negotiable through a phone call, we are HRDCorp Registered Training Provider, SBL-KHAS Approved Training Provider & Appreciated by University Technology Malaysia. Specialize in Industrial Automation training, services, and consultation since the year 2012.

Assist in participants project, setting up Control Panel parts, Terminal Blocks, Earth Terminals, 2A MCB ,Terminals Links, Fuse Terminal and training for 2 days.

#cnc #plc #programmablelogiccontrollers #FX3G40MR #mitsubishielectric #mitsubishiplc #industrialautomation #automation #industrial #industrialservice #electricalengineering #gxworks2 #controlpanel #TerminalBlocks #industrialtrainingprovider #EarthTerminals #industrialprojects #hrdf #TerminalsLinks #malaysia #johor #pasirgudang #plchmiscada #kemahiranplc #industry4_0 #pasirgudang #trainingprogram #FuseTerminal #ElectronicsMaterials #industry4point0

OMRON PLC, CX-PROGRAMMER + HMI BASIC to ADVANCE from a company that provide scope of works that includes supply, delivery, testing & commissioning, servicing & maintenance and a combination of other M&E Services.(5 Days)

22/6/2022

Direct message Thivyan/Yokes for inquiry/Booking -> Please register here:- https://www.asasmy.com/registration.html . Pricing is negotiable through a phone call, we are HRDCorp Registered Training Provider, SBL-KHAS Approved Training Provider & Appreciated by University Technology Malaysia. Specialize in Industrial Automation training, services, and consultation since the year 2012.

Registration request :- Registration

Available Dates : 1st August 2022 Onward.

The participant has learnt the following task:
· Basic to Advance Training.
· CX Programmer V9.7 (Omron C Series PLC).
· V-SFT V5 & TELLUS (HMI Software).
· Configuration of Hardware & HMI.
· Backup & Restore.
· Online Debugging & Troubleshooting Procedure.
· Hands-On Project.
· Basic PLC Wiring.

#Johor #industrialautomation #omronplc #plc #cxprogrammer #cj1m #cseries #plctraining #malaysia #hmi #hrdf #supply #delivery #manufacturing #testing #commissioning #hardware #servicing #equipmentdesign #systemintegration #controlautomationsystem #chillerplantmanagementsystem #tellus #malaysia #development #manufacturing #skilltraining #psmb #supplychain #industry4_0

PLC , HMI , SCADA TRAINING in SIEMENS Simatic Manager V5.6 Software with S7-300 PLC Hardware Basic to Advance , In-House / ASASMY LAB / 1 Pax / 5 Days

8/6/2022

Direct message Thivyan/Yokes for inquiry/Booking -> Please register here:- https://www.asasmy.com/registration.html . Pricing is negotiable through a phone call, we are HRDCorp Registered Training Provider, SBL-KHAS Approved Training Provider & Appreciated by University Technology Malaysia. Specialize in Industrial Automation training, services, and consultation since the year 2012.

The participant has learnt the following task:
• Basic to Advance Training.
• Simatic Manager V5.6 (S7-300 PLC).
• WinCC Flexible 2008 SP5 + Runtime.
• Configuration of Hardware & HMI.
• Backup & Restore.
• Online Debugging & Troubleshooting Procedure.
• Hands-On Project.

#plcprogramming #automation #plc #programming #scada #industrialautomation #hmiscada #automation #electricalengineering #controlsystem #instrumentation #siemensplc #plcsiemens #hmi #plctraining #electrical #siemens #industry4_0 #tiaportal #factoryautomation #industrialcontrol #training #scadatraining #hmitraining #industrial #Engineering #controlpanel #PanelBuilding #maintenance #malaysia

PLC , HMI , SCADA TRAINING in OMRON CX-PROGRAMMER + HMI BASIC to ADVANCE from a company that provide scope of works that includes supply, delivery, testing & commissioning, servicing & maintenance and a combination of other M&E Services.(5 Days)

7/6/2022

Direct message Thivyan/Yokes for inquiry/Booking -> Please register here:- https://www.asasmy.com/registration.html . Pricing is negotiable through a phone call, we are HRDCorp Registered Training Provider, SBL-KHAS Approved Training Provider & Appreciated by University Technology Malaysia. Specialize in Industrial Automation training, services, and consultation since the year 2012.

The participant has learnt the following task:
· Basic to Advance Training.
· CX Programmer V9.7 (Omron C Series PLC).
· V-SFT V5 & TELLUS (HMI Software).
· Configuration of Hardware & HMI.
· Backup & Restore.
· Online Debugging & Troubleshooting Procedure.
· Hands-On Project.
· Basic PLC Wiring.

#selangor #industrialautomation #omronplc #plc #cxprogrammer #cj1m #cseries #plctraining #malaysia #hmi #hrdf #supply #delivery #manufacturing #testing #commissioning #hardware #servicing #equipmentdesign #systemintegration #controlautomationsystem #chillerplantmanagementsystem #tellus #malaysia #development #manufacturing #skilltraining #psmb #supplychain #industry4_0

PLC , HMI , SCADA TRAINING in SIEMENS Simatic Manager V5.6 Software with S7-300 PLC Hardware + HMI Basic to Advance , In-House / ASASMY LAB / Group Training / 3 Pax / Company that provides engineering solutions and components to clients.

1/6/2022

Direct message Thivyan/Yokes for inquiry/Booking -> Please register here:- https://www.asasmy.com/registration.html . Pricing is negotiable through a phone call, we are HRDCorp Registered Training Provider, SBL-KHAS Approved Training Provider & Appreciated by University Technology Malaysia. Specialize in Industrial Automation training, services, and consultation since the year 2012.

The participant has learnt the following task:
• Basic to Advance Training.
• Simatic Manager V5.6 (S7-300 PLC).
• WinCC Flexible 2008 SP5 + Runtime.
• Configuration of Hardware & HMI.
• Backup & Restore.
• Online Debugging & Troubleshooting Procedure.
• Hands-On Project.

#plcprogramming #automation #plc #programming #scada #industrialautomation #hmiscada #automation #electricalengineering #controlsystem #instrumentation #siemensplc #plcsiemens #hmi #plctraining #electrical #siemens #industry4_0 #tiaportal #factoryautomation #industrialcontrol #training #scadatraining #hmitraining #industrial #Engineering #smartphone #PanelBuilding #maintenance #malaysia

PLC , HMI , SCADA TRAINING in Allen Bradley RSLogix 5000 Software with Control/Compact Logix Hardware, Basic to Advance , In-House / ASASMY LAB / One-to-One Training / Personal Sponsor / From a Project Based company in Kulai.

11/5/2022

Direct message Thivyan/Yokes for inquiry/Booking -> Please register here:- https://www.asasmy.com/registration.html . Pricing is negotiable through a phone call, we are HRDCorp Registered Training Provider, SBL-KHAS Approved Training Provider & Appreciated by University Technology Malaysia. Specialize in Industrial Automation training, services, and consultation since the year 2012.

The participant has learnt the following task:
· Basic & Advance PLC Training.
· RS Logix 5000 Software. (Compact & Control Logix PLC)
· Ladder Logix Programming.
· Setting Up Compact & Control Logix Hardware.
· HMI(VSFT + TELLUS Interface).
· Online Debugging & Troubleshooting Procedure.
· Hardware Wiring.
· Hands-On Project.

*Certificate (Digital and Hardcopy) , Free Consultation will be given to all our participant forever.

#plcprogramming #automation #plc #programming #scada #industrialautomation #hmiscada #automationengineering #electricalengineering #controlsystem #instrumentation #siemensplc #plcsiemens #hmi #plctraining #electrical #siemens #industry4_0 #tiaportal #factoryautomation #industrialcontrol #training #scadatraining #hmitraining #industrial #internetofthings #smartphone #utm #kulai #malaysia

PUBLIC PLC , HMI & SCADA TRAINING IN OMRON C SERIES PLC WITH CX PROGRAMMER SOFTWARE (5 DAYS)

9/5/2022

Please whatsapp "Mr.Thivyan" (+60146016598) for registration inquiry or request for registration here at this link :- REGISTER
Open to under “Personal & Company” Sponsors Only
Date : 23rd May 2022(Monday) to 27TH May 2022(Friday)
Time : 9AM to 5PM
Venue : ASASMY Training LAB HQ, Johor Bahru, Johor.
Max Pax : 6 Pax
Current Confirm Booking : 1 Participant.
Certificate (Hard & Soft Digital Copy) Provided.
Training Software & Manuals Provided.
Free Consultation forever after training ends.

#johor #industrialautomation #omronplc #plc #cxprogrammer #cj1m #industrialautomation #machine #plctraining #malaysia #hmi #publictraining #plchmiscada #plctraining #scada #johorbahru #mechanical #electronics #controlpaneldesign #factory #troubleshooting #vsft #tellus #malaysia #penang #skudai #latihankemahiran #skilltraining #psmb #programming #industry4_0