TYPES OF Siemens plc communication ports
Jenis Port Komunikasi untuk Siemens PLC
Reference Link : https://instrumentationtools.com/cpu-communication-ports/
In this article, we will study about the types of CPU communication port that is available on the Siemens PLC.
Without communication field devices, network switches, HMI, PLC can’t talk to each other so communication is a necessary part of any control system.
CPU Communication Ports
In the Siemens PLC, we have several types of ports are available to communicate with other devices.
Let’s analyze and differentiate each type of communication port.:- *scroll below..
1. DP (decentralize peripheral):
Another communication port looks the same as MPI as this also used RS-485 communication protocol.
DP port provides an even higher data transfer rate than an MPI port.
You can connect another automation facility like VFD, Interface module, etc.
Using the DP network one can transmit data remotely. For example, a distance from the field to the control room is far then instead of pulling wires all the way the field to control room, you can transfer all the I/Os to the field and can pull a single PROFIBUS-DP cable to communicate with the I/Os.
You can connect up to 128 devices on a single network.
2. MPI (Multi-Point Interface):
MPI port is used RS-485 communication protocol.
We use the MPI port when we have to transfer an existing program to the PLC. We can achieve it by connecting it with a PC adapter.
You can connect CPU with an HMI; this way data can easily transfer to the HMI.
You can also connect with another automation facility.
3. PTP (Precision Time Protocol)
It uses RJ45 (Register Jack) network interface to communicate with other facilities.
It uses the IEEE 802.3 standard to communicate.
Provide a faster data transfer rate than the PROFIBUS-DP network.
You can connect it with an HMI from Laptop to transfer the data.
ProfiNet is used where data needs to transfer at a very higher rate like in motion control application.
Ethernet can be used in the normal application except for motion control.
I hope you may have a clear idea about ports are available on the CPU of Siemens PLC.
Still, doubts in mind? Then dont hasitate to whatsapp Mr.Thivyan ( +60146016598 )
Reference Link : https://instrumentationtools.com/cpu-communication-ports/
In AS Automation Services , we provide detailed , fully equipped with PLC hardware , software & laptop for cheapest price possible and we also provide one-to-one training
For more info contact Mr.TSoon or Whatsapp @ +60163329691
HashTags : #asasmy #plc #communication #ports #siemens #s7plc #s5plc #tiaportal #training #engineering #electrical #electronics #hmi #scada #ladderlogic #industrialautomation #automationservices #troubleshootings #industry4_0 #ladderdiagram #simaticmanager #rj45 #rs485 #mpicable #ports #network #programming #industrialprogramming #malaysia #johor