Upcoming PLC, HMI & SCADA Training: Mitsubishi FX Series with GX Works 3 & Hakko/Tellus Software!23/4/2025 Request for Quotation Form We're excited to announce our 5-day intensive training session on Mitsubishi FX Series PLC programming using GX Works 3 and Tellus/Hakko software. This hands-on, in-depth course is perfect for engineers, technicians, and automation enthusiasts looking to elevate their industrial automation skills. 🔧 Date: 12th May 2025 – 16th May 2025 🕘 Time: 9:00 AM – 5:00 PM 📍 Location: AS Automation Services, Johor Bahru, Malaysia 👨🏫 Trainer: Mr. Thivyan Nair, Senior Trainer, Engineer & Consultant ✅ What You'll Learn: Basic to Advanced Programming on Mitsubishi FX Series PLC. GX Works 3 Software Configuration. HMI Programming & Interface using Tellus/Hakko Software. PLC & HMI Hardware Setup. Online Debugging & Troubleshooting Procedures. Backup & Restore Best Practices. PLC Hardware Wiring. Real-time Hands-On Project Work. 🔒 Seats are Limited – 2 Participants Already Confirmed! 🎯 Only 8 slots available. Open for personal sponsors or company registrations (not HRDCorp-claimable). 📩 Request for Quotation or Register via WhatsApp: +60102443914 🌐 Request for Quotation Form 📸 Sneak Peek: Check out the images above – real training moments, hardware kits, and our proud participants receiving their certificates. Learn from experience, not just theory. #MitsubishiPLC #GXWorks3 #TellusSoftware #HakkoHMI #PLCTrainingMalaysia #HMITraining #SCADATraining #AutomationTraining #IndustrialAutomation #MitsubishiFXSeries #PLCMalaysia #AutomationEngineer #JohorBahruTraining #PLCProgrammer #EngineeringSkills #PLCWorkshop #SCADAWorkshop #HandsOnTraining #AutomationServices #ASEngineering #ThivyanNair #EngineeringConsultant #ControlSystems #FactoryAutomation #TechnicalTraining #GXWorks3Training #HakkoTraining #IndustrialControls #PLC2025 #SCADA2025 #TrainWithExperts
0 Comments
To request for quotation: - LINK For Direct Inquiry (WhatsApp Only):- +60102443914. From 17–21 March 2025, AS Automation Services successfully conducted a 5-day Omron NX Series PLC, HMI & SCADA Training for 2 participants under HRDCorp Claimable Courses (SBL-Khas). The participants came from a company that specializes in fiberglass-reinforced plastic (FRP) and glass-reinforced plastic (GRP) products such as cable trays, gratings, and structural supports, serving key sectors like oil & gas, power, and infrastructure across Southeast Asia and the Middle East. This training covered both Basic to Advanced levels using: Omron Sysmac Studio V1.52 (NX PLC Series). Omron NB Designer V1.4 (NB HMI Panel). HMI & SCADA system programming. Hardware configuration. Backup & Restore. Online Debugging & Troubleshooting. PLC hardware wiring & hands-on project. Our practical, hands-on approach ensures engineers are project-ready and confident to apply their skills in real-world environments. ✅ For future sessions, register now at: 👉 https://www.asasmy.com/request-quotation.html or Direct Inquiry (WhatsApp Only) :- +60102443914. #OmronPLC #SysmacStudio #NBDesigner #PLCTrainingMalaysia #HRDCorpClaimable #SCADATraining #HMITraining #AutomationTraining #IndustrialAutomation #ControlSystems #PLCMalaysia #HandsOnTraining #ManufacturingMalaysia #OilAndGasMalaysia #PowerIndustry #InfrastructureProjects #GRPProducts #FRPProducts #CableTraySolutions #IndustrialSupport #AutomationSolutions #SmartManufacturing #PLCHandsOn #SCADAMalaysia #HMIProjects #FactoryAutomation #EngineeringMalaysia #ASAutomationServices
To request for quotation: - LINK For Direct Inquiry (WhatsApp Only) :- +60102443914. We successfully conducted a 5-day PLC, HMI, and SCADA Training on 03–07 March 2025 for 2 participants from a company involved in gold mining operations in Pahang, Malaysia. This training was HRDCorp Claimable (SBL-Khas) and held at our AS Automation Services Training Centre. The participants explored from Basic to Advanced topics, focusing on Siemens S7-1200 PLC and TIA Portal V18 Software, including hands-on configuration with Siemens KTP400 HMI and Sinamics G120 Drive Control. Throughout the training, they gained expertise in: Key skills gained: Siemens S7-1200 PLC hardware setup Siemens TIA Portal V18 programming HMI & SCADA configuration Sinamics G120 Drive setup & control Online Debugging & Troubleshooting Backup & Restore PLC Hardware Wiring Real-world Hands-on Project We thank the participants for their full commitment throughout the training! For future sessions, register now at: 👉 Request for Quote or Direct Inquiry (WhatsApp Only) :- +60102443914. #PLCTraining #SiemensTIA #AutomationTraining #SiemensS71200 #HMITutorial #SCADAProgramming #TIA18 #IndustrialAutomation #SinamicsG120 #ElectricalEngineering #PLCHMI #SCADATraining #HRDCorpClaimable #SBLKhas #GoldMiningMalaysia #TIAHandsOn #SiemensDrive #TIAProjects #EngineeringMalaysia #ProcessAutomation #AutomationMalaysia #IndustrialTraining #TIAWorkshop #PLCProject #HMIProject #ControlSystems #FactoryAutomation #TIAAdvanced #ASAutomationServices
On December 3, 2024, AS Automation Services successfully repaired and serviced two (2) units of Advantech WOP-2080T-S2AE HMIs for a valued client. Our team performed faulty component replacement, thorough testing, and commissioning to restore full functionality and ensure optimal performance. For HMI, PLC, and SCADA troubleshooting, repair, and servicing, trust AS Automation Services to deliver reliable and efficient solutions. 📩 Get in touch: Contact Us 📞 WhatsApp us: +60102443914 #HMIRepair #AdvantechHMI #AutomationServices #IndustrialAutomation #PLCProgramming #HMIProgramming #SCADA #FactoryAutomation #ProcessControl #ManufacturingSolutions #AutomationMalaysia #SmartFactory #ControlSystems #Troubleshooting #EngineeringSolutions #IndustrialMaintenance #AutomationExperts #ElectronicComponents #IndustrialEquipment #HMIService #AutomationSupport #PLCIntegration #MachineMaintenance #IndustrialRepairs #TechSupport #AutomationTraining #ASAutomationServices
Selamat Hari Raya Aidilfitri 2025!31/3/2025 AS Automation Services wishes you and your loved ones a joyous and blessed Hari Raya! May this festive season bring you happiness, success, and prosperity. ✨ If you're looking for PLC Training, PLC Programming, Troubleshooting, PLC Parts, or Training Kits, feel free to contact us! 📩💡 📞 WhatsApp us: +60102443914 🌐 Visit our website: www.asasmy.com Selamat Hari Raya & Maaf Zahir Batin! 🎉 #HariRaya2025 #SelamatHariRaya #Aidilfitri #EidMubarak #Eid2025 #RamadanKareem #Automation #IndustrialAutomation #PLCTechnology #PLCTraining #SCADA #HMI #EngineeringLife #Manufacturing #FactoryAutomation #TechSolutions #Troubleshooting #Programming #ControlSystems #AutomationEngineer #TrainingAndDevelopment #SkillsTraining #MalaysiaBusiness #SmartFactory #DigitalTransformation #FutureOfWork #TechIndustry #IndustrialTraining #EngineerLife #AutomationMalaysia
🚀 On January 6th, 2025, our valued client, a leading manufacturer and trader of household cleaning and personal care products under brands like DEPEX, placed an order for Mitsubishi GX Works 3 Software. As an officially licensed software from Mitsubishi Japan, the delivery process took 18-22 weeks—yes, it takes time, but that’s because we ensure genuine licenses straight from the source! 🎯 🔹 Order Details: ✅ GX Works 3 Software (Includes GX Works 2). ✅ DVD with License Key Certificate from Mitsubishi Japan. ✅ Lead Time: 18-22 Weeks. We always strive to provide authentic automation software solutions to our clients, ensuring reliability, security, and long-term usability. Thank you for trusting us with your industrial automation needs! 🌍💡 Looking for original licensed software? 📩 WhatsApp us now: (+60102443914) 💡 Need PLC, HMI, or SCADA Training? Check out our website: www.asasmy.com 📌 Get a quote here: Request a Quote ⚙ Need troubleshooting, control panel upgrades, or expert consultation? ✅ Get in touch with us today! #Mitsubishi #GXWorks3 #AutomationSoftware #PLCProgramming #MitsubishiPLC #GXWorks2 #OriginalLicense #IndustrialAutomation #SoftwareSolutions #PLC #HMISoftware #SCADA #FactoryAutomation #Manufacturing #AutomationEngineer #IndustrialTechnology #ProcessAutomation #MachineAutomation #OEM #Industry40 #ControlSystems #AutomationExperts #EngineeringSolutions #SystemIntegration #TechInnovation #LicensedSoftware #AutomationSupport #IndustrialControls #AutomationMalaysia #ASAutomationServices
To request for quotation:- LINK For Direct Inquiry (WhatsApp Only) :- +60102443914. From 19-24 February 2025, a Personal Sponsored participant, an engineer/tech personnel, successfully completed a 6-day intensive training at AS Automation Services. This hands-on program covered Siemens S7-1200 & S7-300 PLCs using TIA Portal V15.1 & Simatic Manager 5.6 Software, along with HMI and SCADA applications. 🔹 Key Training Highlights: ✅ Basic to Advanced PLC Programming. ✅ Siemens S7-1200 & S7-300 Hardware Setup. ✅ Siemens TIA Portal V15.1 & Simatic Manager 5.6 Software. ✅ HMI Configuration (Siemens KTP400). ✅ Backup & Restore Procedures. ✅ Online Debugging & Troubleshooting. ✅ Hands-on Hardware Wiring & Project. This training provided in-depth real-world industrial automation skills, enhancing the participant’s expertise in Siemens PLC, HMI, and SCADA applications. To request for quotation :- LINK For Direct Inquiry (WhatsApp Only) :- +60102443914. #SiemensPLC #PLCTraining #Automation #TIA Portal #SimaticManager #HMIProgramming #SCADA #Industry40 #S71200 #S7300 #IndustrialAutomation #ControlSystems #FactoryAutomation #Engineering #AutomationEngineer #DriveControl #SinamicsG120 #ElectricalEngineering #PLCProgramming #EngineeringLife #Manufacturing #SmartFactory #DigitalTransformation #AutomationSolutions #TechTraining #IndustrialControl #HandsOnTraining #ProcessControl #WeAreAutomation
Successful Completion: Siemens S7-1200 PLC, HMI & SCADA Training with Sinamics G120 Drive Control!12/3/2025 To request for quotation: - LINK For Direct Inquiry (WhatsApp Only): - +60102443914. From 17-21 February 2025, AS Automation Services successfully conducted a 5-day intensive Siemens S7-1200 PLC, HMI & SCADA Training using Siemens TIA Portal V18 for three participants under Personal & Company Sponsorship. 🔹 The Company-Sponsored participant specializes in marketing, service & maintenance of wide-belt sanding machines for the panel industry. 🔹 The Personal-Sponsored participant is an engineer/technical personnel member looking to upskill in PLC & automation. Throughout the training, they gained expertise in: ✅ Basic to Advanced PLC & HMI Programming. ✅ Siemens TIA Portal V18 Software. ✅ Siemens S7-1200 PLC & HMI (KTP400) Configuration. ✅ Sinamics G120 Drive Control & Motor Integration. ✅ Backup & Restore, Online Debugging & Troubleshooting. ✅ Hardware Wiring & Hands-on Projects. This hands-on session equipped them with essential skills for real-world industrial automation applications! 🔧💡 To request for quotation: - LINK For Direct Inquiry (WhatsApp Only): - +60102443914. #PLCTraining #SiemensPLC #TIA_Portal #Automation #HMI #SCADA #IndustrialAutomation #PLCProgramming #Engineering #AutomationExperts #FactoryAutomation #DriveControl #SinamicsG120 #ElectricalEngineering #TechTraining #AutomationTraining #MachineControl #SiemensTIA #PLCWorkshop #ControlSystems #Maintenance #SiemensHMI #Troubleshooting #AdvancedPLC #Industry40 #HandsOnLearning #EngineerLife #Manufacturing #SmartIndustry #SkillDevelopment
From February 10-14, 2025, AS Automation Services successfully conducted PLC, HMI & SCADA Training for a company-sponsored client specializing in offshore oil & gas exploration, production, and development in Sabah, Malaysia. 🌊🏗️ The participant undertook Basic to Advanced training, focusing on Allen Bradley CompactLogix & ControlLogix PLCs using RSLogix 5000 Software. This hands-on program provided real-world applications, enabling the participant to configure, program, troubleshoot, and integrate PLCs with HMI & SCADA systems. 💻🔧 🔥 Training Highlights: ✅ Allen Bradley RSLogix 5000 Software. ✅ Ladder Logic & Function Block Programming. ✅ CompactLogix & ControlLogix Hardware Setup. ✅ Hardware & HMI Configuration (VSFT + TELLUS). ✅ Online Debugging & Troubleshooting. ✅ Backup & Restore Procedures. ✅ PLC Hardware Wiring & Hands-On Project. Our training ensures that participants gain confidence in industrial automation, equipping them with the skills to optimize plant operations and enhance system efficiency. 📢 Want to upgrade your automation skills? 📍 Join our upcoming PLC, HMI & SCADA training! Secure your slot now! To request for quotation :- LINK For Direct Inquiry (WhatsApp Only) :- +60102443914. 🔗 Contact us for inquiries! 📞 #PLCTraining #Automation #AllenBradley #ControlLogix #CompactLogix #SCADA #HMI #RSLogix5000 #IndustrialAutomation #Troubleshooting #OilAndGas #Engineering #Maintenance #Instrumentation #ProcessControl #AutomationMalaysia #Industry40 #FactoryAutomation #SCADAProgramming #HMIDesign #PLCProgramming #ElectricalEngineering #MachineControl #Manufacturing #Siemens #Omron #MitsubishiPLC #IndustrialTech #AutomationExperts #EngineeringTraining #ASAutomationServices
🚀 Advance Your Industrial Automation Skills! 🚀 Join us for an intensive 5-day Siemens S7-300 PLC, HMI & SCADA Training from August 4-8, 2025, at AS Automation Services, Johor Bahru. This hands-on training is designed for engineers, technicians, and automation professionals looking to gain in-depth knowledge of Siemens Simatic Manager 5.6 Software and WinCC Flexible HMI programming. 👥 Limited Seats Available – Request for quotation Now! What You Will Learn: ✅ Basic to Advanced Training on Siemens S7-300 PLC. ✅ Siemens Simatic Manager 5.6 – Programming & Project Development. ✅ Siemens WinCC Flexible – HMI Configuration & Interface. ✅ Hardware & HMI Setup (Siemens TP177B). ✅ Backup & Restore Techniques for PLC Systems. ✅ Online Debugging & Troubleshooting for Real-Time Solutions. ✅ PLC Hardware Wiring & Hands-On Projects. Why Choose Our Training? 🔥 100% Practical – Hands-on with real PLC hardware 🔥 Industry-Standard Curriculum – Get job-ready skills 🔥 Expert Trainers – Learn from experienced automation engineers 🔥 Certificate of Completion – Enhance your career opportunities 🔥 Post-Training Support – Free consultation for project troubleshooting 📍 Location: AS Automation Services, Johor Bahru 🕘 Time: 9 AM – 5 PM 👥 Limited Seats Available – Request for quotation Now! 🔗 Secure Your Spot Today! 👉 Request for quotation Here 📞 Contact Us (WhatsApp): +60102443914 #SiemensTraining #PLCTraining #IndustrialAutomation #SiemensS7300 #AutomationEngineer #HMITraining #SCADATraining #TIAportal #SimaticManager #FactoryAutomation #PLCProgramming #AutomationMalaysia #WinCCFlexible #IndustrialControl #ProcessAutomation #EngineeringTraining #SiemensPLC #ElectricalEngineering #ControlSystems #PLCCourse #AutomationJobs #HandsOnTraining #TechEducation #OnlineDebugging #HardwareWiring #AutomationExperts #ManufacturingTechnology #Industry40 #PLCWorkshop #TechSkillsUpgrade
|
archives
April 2025
March 2025
February 2025
January 2025
December 2024
November 2024
October 2024
September 2024
August 2024
July 2024
June 2024
May 2024
April 2024
March 2024
February 2024
January 2024
December 2023
November 2023
October 2023
September 2023
August 2023
July 2023
June 2023
May 2023
April 2023
March 2023
February 2023
January 2023
December 2022
November 2022
October 2022
September 2022
August 2022
July 2022
June 2022
May 2022
April 2022
March 2022
February 2022
January 2022
December 2021
November 2021
October 2021
September 2021
August 2021
July 2021
June 2021
May 2021
April 2021
March 2021
February 2021
January 2021
December 2020
November 2020
October 2020
September 2020
August 2020
July 2020
June 2020
May 2020
April 2020
March 2020
February 2020
January 2020
December 2019
November 2019
October 2019
September 2019
August 2019
July 2019
June 2019
May 2019
April 2019
March 2019
February 2019
January 2019
December 2018
November 2018
October 2018
September 2018
August 2018
July 2018
June 2018
May 2018
April 2018
March 2018
February 2018
December 2017
November 2017
October 2017
September 2017
August 2017
July 2017
June 2017
May 2017
April 2017
March 2017
December 2016
November 2016
October 2016
September 2016
August 2016
September 2015
August 2015
July 2015
June 2015
April 2015
March 2015
February 2015
January 2015
December 2014
November 2014
October 2014
September 2014
August 2014
June 2014
May 2014
categoryDIRECTOR
TSoon Author
Yokes |