AS Automation Services Blog - PLC Training Centre Malaysia

Mitsubishi FX Series + HMI with GX-Works 2 Software, Basic Level, 6 PAX for a company that produce vacuum cleaner, Hair dryer, air purifier and air Wrap

23/8/2019

The Participant has learnt the following task :
Mitsubishi FX Series PLC Hardware.
GX-Works 2 Software.
Ladder; Programming.
Online, Downloading and Troubleshooting Procedures.
VSFT & TELLUS HMI (Basic Level).
Hands-On Projects.

#PLCTraining #plc #industrialautomation #electricalengineering #engineering #programming #mitsubishiplc #vacuumcleanerportable #HMI #GXWorks2 #fxseries #fx3s #fx3u # #latihanplc #pusatlatihan #automasikilang #training #industrialskill #programmablelogiccontroller #hmi #dyson #pickandplace #senaiairport #malaysia #johor #senai #industry4 #ministryoftradeandindustry #ladderdiagram #jig #airwrap

Siemens S7-1200/S7-300 + HMI with TIA Portal & SIMATIC Manager Software, Advance, 5 Days, 1 PAX ( Under Personal Sponsor Special Request)

19/8/2019

This is special requested course under Personal Sponsor.
The participant has learnt the following task:

S7-300 Configuration/SIMATIC Manager.
TIA Portal V15.1 (S7-1200 PLC).
WinCC Flexible 2008 SP3.
WinCC Flexible Advance.
Configuration of Hardware & HMI.
Backup & Restore.
WinCC Runtime.
Online, Debugging & Troubleshooting Procedure.
Hands-On Projects.

#plc #programmablelogiccontroller #industrialautomation #siemens #simaticmanager #tiaportal #s71200 #s7300 #plctrainingmalaysia #malaysia #johor #pusatlatihan #hrdf #kemahiranplc #automasikilang #mechenical #electricalelectronics #programming #hmi #scada #wincc #manufacturing #oilandgas #asrs #conveyor #plctraining #technician #troubleshooting #controlpanel #robotic

OMRON C Series + HMI with CX Programmer Software, Basic & Intermediate, 2 PAX for a company that produce vacuum cleaner ,Hair dryer, air purifier and air Wrap

10/8/2019

The Participant has learnt the following task :

    OMRON CP1L, CP1E& CJ Series.
    Ladder Diagram Programming.
    HMI & SCADA (VSFT&TELLUS).
    CX Programmer V9.6 Software.
    Online Downloading and Troubleshooting Procedure.
    Hands-On Projects.

--link at our BIO.

#PLCTraining #plc #industrialautomation #electricalengineering #engineering #programming #omron #vacuumcleanerportable #HMI #cxprogrammer #cp1e #cj1m #cp1l # #latihanplc #pusatlatihan #automasikilang #training #industrialskill #programmablelogiccontroller #hmi #dyson #pickandplace #hrdf #malaysia #johor #skudai #industry4 #ministryoftradeandindustry #ladderdiagram #jig #airwrap

Mitsubishi FX Series PLC with Servo/Stepper Motor + HMI, Intermediate & Advance 3 PAX, 3 Days (Including NEW Mitsubishi GOT Software) for company that manufacture plumbing products and bathroom accessories. Example polymer taps, valved, showers, bidet, t

1/8/2019

The Participents has learnt the following task :

    GX-WORKS 2.
    LADDER PROGRAMMING.
    Setting up Servo Motors& Stepper Motor/ AI,AO
    Online, Downloading and Troubleshoting Procedures.
    VSFT & TELLUS HMI.
    Mitsubishi GOT Basic.
    Hands-On projects.

For Direct Registration/Request ->: www.asasmy.com/registration.html

#PLCTraining #plc #programmablelogiccontrollers #hmi #mitsubishielectric #mitsubishiplc #industrialautomation #plumbingproducts #polymer #bathroomaccessories #electricalengineering #gxworks2 #ladderprogramming #servomotors #troubleshootings #tellus #handsonprojects #hrdf #trainingprovider #malaysia #johor #skudai #pusatlatihan #kemahiranplc #bahasamelayu #psmb #trainingprogram #industrialprogramming #machineprogramming #industry4point0

Link at our Bio --

AS Automation Systems Training Centre PLT .aka. PLC Training Centre Malaysia (Pusat Latihan Kemahiran PLC dan Automasi Kilang)

Allen Bradley RSLogix5000 + HMI with CompactLogix & Micro850 PLC Hardware, Basic & Intermediate, 2 PAX for a company that operate and handle Airport Baggage Conveyor Systems in KLIA. Class was conducted on site at their premises for 3 Days.

31/7/2019

The Participant has learnt the following task :
-RS-Logix5000 V20.04 Software.
-LADDER / Statement List Programming.
-Setting Up / CompactLogix & Micro850 Hardware.
-HMI (VSFT + TELLUS Interface).
-Online Debugging & Troubleshooting Procedure.
-Hands-On Projects.

#PLCTraining #plc #industrialautomation #electricalengineering #engineering #programming #allenbradley #AirportBaggageConveyorSystems #HMI #rslogix5000 #compactlogix #micro850 #conveyorsystem #latihanplc #pusatlatihan #automasikilang #training #industrialskill #programmablelogiccontroller #hmi #klia #airport #hrdf #malaysia #johor #skudai #industry4 #ministryoftradeandindustry #ladderdiagram
#baggage

SIEMENS PLC BASIC & INTERMEDIATE, 4 Pax , 8 Days Weekends

16/7/2019

The participant has learnt the following task: Simatic Manager V5.5 (S7-300 PLC), WinCC Flexible 2008 SP3, Configuration of Hardware & HMI, Backup & Restore, WinCC Runtime, Omron Basic (Add-On), Online Debugging & Troubleshooting Procedure, Hands-On Project

#Batam #indonesia #industry #johor #Penang #plctraining #siemens #s7300 #PLC #ProgrammableLogicController #omron #Industry4 #IndustrialAutomation #Tellus #vsft #scada #hmi #malaysia #industrymalaysia #ministryoftradeandindustry #automasikilang #pusatlatihankemahiranplcdanscada #engineering #electricalelectronics #programming #ladderlogic #healthcare #lighting #consumerlifestyle #manufacturer

OMRON C SERIES PLC ADVANCE , One-To-One , 5 Days

15/7/2019

The participant has learnt the following task: OMRON PLC CP1L, CP1E Series, & CJ Series, Ladder Logic Programming, HMI & SCADA (V-SFT & TELLUS), CX Programmer V9.6 Software, Online, Downloading and ,Troubleshooting Procedures, Hardware Wiring, Hands-on project.

#training #malaysia #Industrial #Skills #trainingday #industrialdesign #industry #skill #traininghard #trainingcamp #MalaysiaTrulyAsia #malaysiaautomation #automation #malaysiaboleh #trainingskills #industrialfurniture #industrialstyle #malaysiaprogrammer #trainings #IndustryNight #industrialpiercing #trainingpartner #series3 #industrialmachine #industrialart #advance #trainingcenter #malaysiabrand #malaysiaviners #industrymonday #plc

Siemens S7-300 PLC Basic & Intermediate & Advance with Simatic Manager Software , 1-TO-1 Training , 5 Days , From Oil and Gas Factory , Tamil Nadu , India.

23/6/2019

The participant has learnt the following task:
-Simatic Manager V5.5 (S7-300 PLC).
-WinCC Flexible 2008 SP3.
-Configuration of Hardware & HMI.
-Backup & Restore.
-WinCC Runtime.
-Online Debugging & -Troubleshooting Procedure.
-Hands-On Project.

#India #TamilNadu #OilandGas #industry #johor #plctraining #siemens #s7300 #PLC #ProgrammableLogicController #Training #Industry4 #IndustrialAutomation #Tellus #vsft #scada #hmi #malaysia #industrymalaysia #ministryoftradeandindustry #automasikilang #pusatlatihankemahiranplcdanscada #engineering #electricalelectronics #programming #ladderlogic #healthcare #lighting #consumerlifestyle #company #pasirgudang

TWO NEW PLC TRAINING ADDED IN THE LIST - OMRON NX SERIES & GE FANUC SERIES 90-30 , MALAYSIA

13/6/2019

Click the picture to enter the course catagory for the situated training

OMRON PLC NX1P2 Model : A stepping stone to Industry 4.0 & Internet of Things !
Advanced motion control and networks for onsite IoT in a Sysmac entry model.
Omron's NX1P is a powerful all-in-one controller in the Sysmac platform designed to manage advanced motion, networking, IO, and onsite IoT in a compact entry model.
Connect local IO to reduce cabinet size and expand to adjacent technologies, such as vision and safety, using this groundbreaking CPU.

GE Fanuc Series 90-30 : Coming Into Malaysian Market and its HOT!
A versatile family of controllers, I/O and specialty modules with Ethernet communications for a range of industrial control solutions.
Series 90*-30 controllers, I/O and specialty modules feature modular architecture, redundant CPUs and power, and ease of programming. The Series 90-30 is the low-cost solution for high-availability applications.
Build a modern infrastructure based on smart hardware that enables today’s connected machines to securely push actionable data to the enterprise level. Explore GE Industrial Internet Control Solutions.Versatility Reduces System Cost and Space

Over 100 I/O modules for a range of applications
Digital interfaces for push buttons, switches, proximity sensors, relays, contactors and other devices
Analog modules with variable resolution for flow, temperature or pressure applications
Direct connect wiring or remote termination
Local or remote I/O systems

Ethernet Communications Provides Scalable ConnectivityBegin with an Ethernet-enabled CPU, or add a rack-mounted Ethernet module later. The Series 90-30 Ethernet module supports both SRTP and Modbus TCP/IP application protocols.

Siemens S7-300 PLC Basic & Intermediate with Simatic Manager Software , 4 PAX , 8 Days Weekends ( Contract Base Training 2nd Batch ) for Healthcare, Lighthing and Consumer Lifestyle Manufacturing company from Indonesia.

4/6/2019

The participant has learnt the following task:
-Simatic Manager V5.5 (S7-300 PLC).
-WinCC Flexible 2008 SP3.
-Configuration of Hardware & HMI.
-Backup & Restore.
-WinCC Runtime.
-Online Debugging & -Troubleshooting Procedure.
-Hands-On Project.

#Batam #indonesia #industry #johor #Penang #plctraining #siemens #s7300 #PLC #ProgrammableLogicController #Training #Industry4 #IndustrialAutomation #Tellus #vsft #scada #hmi #malaysia #industrymalaysia #ministryoftradeandindustry #automasikilang #pusatlatihankemahiranplcdanscada #engineering #electricalelectronics #programming #ladderlogic #healthcare #lighting #consumerlifestyle #company